Router Forums banner

2018 2X4 Challenge

6269 Views 22 Replies 18 Participants Last post by  Dejure
For this years 2X4 Challenge I made a pair of RH,and LH wooden C-Clamps out of an 8' long 2X4.

The first picture is the inspiration I found on the internet, and then just went from that for my own version. I bought the 1" 8 tpi. lead screw all thread from McMaster Carr along with the matching nuts.

The pictures pretty much explain the build.



See less See more
  • Like
Reactions: 5
1 - 1 of 23 Posts
Good job, Herb. Those will come in handy.
  • Like
Reactions: 1
1 - 1 of 23 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.