Router Forums banner

2018 Christmas addition

861 Views 8 Replies 9 Participants Last post by  harrysin
We always try to add something new to our outdoor Christmas display every year. This part of the display we have been talking about for a some time now. It took quite a while to gather all of the blow mold pieces after much searching We finally have a complete manger scene. :smile: I made the manger it self out of 1 6' X 8' section of pressure treated dog ear privacy fence. and 2 pressure treated 8 foot 2 X 4's. I didn't have to use a router but it was still a fun project. I laid it out and cut the panel into basically 6 pieces It comes apart for storage with 6 screws. I hope my neighbors enjoy it.

Attachments

See less See more
  • Like
Reactions: 5
1 - 9 of 9 Posts
nicely done Roxanne...
  • Like
Reactions: 1
Very nice Roxanne.
  • Like
Reactions: 1
It looks great, Roxanne.
  • Like
Reactions: 1
Very nice.
  • Like
Reactions: 1
Reason for the season. Nicely done.
  • Like
Reactions: 1
Good job, The best one I have seen, that shooting star gives a nice touch.
Herb
  • Like
Reactions: 2
Roxanne it looks great. Good job on the manger with the right choice of materials. Should last many years.
  • Like
Reactions: 3
As everyone has said, it looks fabulous Roxanne.
  • Like
Reactions: 1
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top