Router Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 · (Edited)
Not sure if we have any Georgia boys in here, but I am looking to part with my CNC router. Great machine, just moving into a 4x8 version. Below are the specs.

AVID CNC 25inch x 25inch router with Buildbotics CNC Controller. Condition is Used.

This is a turn key quality CNC router. This machine is all high quality parts from CNC Router Parts (AVID). This is a quality CNC machine capable of routing wood, plastics and aluminum. Not a kiddie CNC, this machine produces quality 3D and repeatable parts. The included buildbotics cnc controller is an all in one box. No computer needed, just plug in your monitor, load your g-code and start machining. It also has built in wireless, so you can load your program from your office. You can even hook up a remote pc camera to watch your work progress. You can check them out at buildbotics.com . The machine and controller are just shy of a year old. Just outgrew this machine and moving up to a 4x8 platform.


  • Aluminum Linear Carriers
  • .25 inch 1018 steel tracks
  • Heavy duty 1545 sides and 1530 cross braces
  • 1/2" 5-start ACME ball screws
  • 5 start High-Load anti-backlash drive nuts
  • High Z Axis (6.5" height)
  • Heavy duty 3060 Gantry
  • Heavy duty 1545 sides
  • Heavy duty 1530 center bracing
  • Dewalt DW618 high torque router with adjustable speeds
  • (4) NEMA 23High Torque stepper motors
  • Vacuum dust boot
  • 4'x4' wood table/bench
  • Buildbotics all in one controller (buildbotics.com)


Machine has a footprint of 42"x42" with a work area of 25"x25". It can be expanded as big as you want. All the expensive motion parts are there.


I am open to reasonable offers. Check my feedback on Ebay ,it is perfect 100% feedback.

Local pickup only due to its size and weight. Im in Georgia between Atlanta and Athens.
Asking $2,300 for the package. Not sure whats it worth, but I know I have way more than that in it. I am open to offers. Need it gone to make room for the one coming. You are welcome to come by for a test drive if you want. Bring some g-code and we will load it up and let it run. Will be up for another week or so before I have to take it down for the new one. My phone is (removed by moderator) and email is (removed by moderator) if you have any questions.

Thanks,
Shane
 

Attachments

·
Retired Moderator
Joined
·
16,385 Posts
Shane our forum rules don't allow anyone to post personal phone numbers or emails. They will have to send you a private message and include their personal information to you.
 
1 - 6 of 6 Posts
Top