Router Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
834 Posts
Discussion Starter · #1 ·
I finished the tray for that 3 in one highchair that I built a while back. Recently I posted some of the pictures of me making the tray.
I since my grand daughter had the highchair out of town, I just gave them the tray and the hardware when they came by for a visit.
I was worried about my grand daughter husbands skills in mounting the tray but they sent me a picture of my great grand daughter in it with the tray attached.
I'll post the pictures of me making it again and the finished pictures.

David
 

Attachments

·
Registered
Joined
·
834 Posts
Discussion Starter · #2 ·
I finished the tray for that 3 in one highchair that I built a while back. Recently I posted some of the pictures of me making the tray.
I since my grand daughter had the highchair out of town, I just gave them the tray and the hardware when they came by for a visit.
I was worried about my grand daughter husbands skills in mounting the tray but they sent me a picture of my great grand daughter in it with the tray attached.
I'll post the pictures of me making it again and the finished pictures.

David
The first shot is me covered in saw dust when I routered the center of the tray out.
The second one is the cut out of the tray from the stock. I had to dowel two pieces of Maple together to get it wide enough for the tray.
Then the tray bottom as I stained and varnished it.
Then my beautiful Great Grand daughter using the tray.
Of course I accused my grand daughter of having Sasha hold the tray in place as they took the picture, but she assures me that it is in fact
connected to the highchair. I guess her husband has some skills.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top