[jeff2022]

I have 3018 prover it has been working great but today I went to start a new project and it will not home but jogs all axis just fine any help apreciated

 

[old55]

Welcome to the forum Jeff.

 

[jeff2022]

thanks

 

[jw2170]

Welcome to the forum @jeff2022 .

I presume this is a CNC question?

 

[jeff2022]

Yes cnc router 3018 genmitsu prover

 

[jw2170]

I would post your question the CNC section of the forum.

Not everyone reads all the sub-forums....

 

[jeff2022]

thank you

 

[jw2170]

No worries,,,,,

 

[Bob Harper]

Yes cnc router 3018 genmitsu prover

Maybe check your parameters to make sure homing is set.

 

[old55]

Welcome to the forum @Bob Harper

 

[Bob Harper]

Welcome to the forum @Bob Harper

Thanks, Ross. Appreciate the welcome. I've been lurking around for 13 years. Must have been turned sideways in the shop playing with my 9 routers amongst the other toys. Stay well.

 

[jw2170]

Welcome to posting, Bob....

 

[MEBCWD]

Is it moving when you try to home it? Is the button for homing okay, dirty, broken, and not working?

If the button is okay not then you might need to check your homing script to make sure it is still correct or you might have to reinstall the controller software.