Router Forums banner
1 - 9 of 9 Posts

·
Registered
Joined
·
669 Posts
Discussion Starter · #1 · (Edited)
last year we made a "Sockeye Salmon Dragon" out of plywood and attached it to our jet boat for the 4th of July parade. than filled the boat with little Vikings who threw candy at the fine folks along the route. All the shields on the side of the boat as well as most of the Viking weaponry, and the Captain America shield were cnc projects.

Anybody have any cool July 4th parade ideas??

Today the dragon is part of the sign and the taco stand on our property.. ( they serve the most wonderful blackened sockey salmon tacos in the world.)
 

Attachments

·
Registered
Mike
Joined
·
3,959 Posts
Scott that made a good looking dragon, great idea. If I think of something that will top that I let you know but don't hold your breath waiting.
 
  • Like
Reactions: Herb Stoops

·
Marine Engineer
Doug
Joined
·
4,960 Posts
Scott,


Your dragon took me back eleven years to some great memories! The gentleman in the Viking helmet was retiring after many years, we had a little fun on his final assignment. Amazing what can be done with a jig saw, some scrap wood and a little paint.

Thanks!
 

Attachments

·
Registered
Joined
·
669 Posts
Discussion Starter · #6 ·
Scott,


Your dragon took me back eleven years to some great memories! The gentleman in the Viking helmet was retiring after many years, we had a little fun on his final assignment. Amazing what can be done with a jig saw, some scrap wood and a little paint.

Thanks!
very Cool Doug, thanks for sharing.
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top