Router Forums banner
1 - 1 of 1 Posts

·
Retired Moderator
Joined
·
16,385 Posts
Sounds like Andy has a better idea. Possibly even better is to step Andy's strips back about 1/2" and then 1/4" in from the edges cut a groove with a table saw or circular saw about 1/4" deep. That will prevent water from rolling around the edge and getting into the strips Andy is suggesting, which will help prevent premature rotting. That's what I do when I make window sills.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top