Router Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
310 Posts
A local flooring store added a small table to their showroom. One of the tile installers and his wife made it. Beautiful work with metallic green epoxy down the center. If I had a shop where I could do this sort of thing, I'd make some sort of fail proof way to do it. Maybe separated by a plexiglass shield or door that could not be opened without unplugging the power cord.
Beautiful stuff, but scary process.
 

· Registered
Joined
·
310 Posts
"...would prefer to die a more natural death .
So I think I’ll pass .
Good one, Rick!
Lightning is natural. 😄
I haven't researched the deaths, but I will assume each one was because it was still plugged in when they made contact with the juice.
Need to find a failsafe way to unplug the unit, not simply turn off the power with a pretty switch before you are allowed access to the hot stuff.
That and to be sure the electrodes cannot fall onto the floor or contact anything but the workpiece.
I a sure there is a ton of safety measures on the net beyond my ramblings.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top