Router Forums banner
1 - 1 of 6 Posts

· Registered
2,046 Posts
Sounds like good advice from SunnyBob but I would add to try on a piece of scrap is possible first and keep in mind you'll make multiple passes to take off the remainder of what wasn't cut with the jig saw, hopefully as little as possible without hitting the final shape needed. The less the better and multiple passes especially with that thickness.

BTW, welcome to the forum.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.