Router Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
508 Posts
I put a 320 grit sheet on my Bosch orbital and gently covered the bare tabletop until it was very smooth. Cleaned it well with a damp cloth and used paste wax to apply several coats - let it dry completely before buffing. Checked it with a straight edge and it is perfectly flat.

Also, due to a fanatical tendency to modify every tool I ever own, I replaced the two fence lockdown knobs with a pair of Rockler tall, soft star-knobbed holddowns - much easier to release and operate. (Also I used those holddowns on a router coping sled.)
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top