Router Forums banner

Another 3D door panel

2037 Views 9 Replies 9 Participants Last post by  Gary Lee
Hi, guys
A friend of mine asked for a piece of wood to install in the front door of his house. I made a simple rectangular piece with the exact dimensions but, I couldn't install it due to the quarantine.
Later I decided to make something different and got some inspiration from the web.
I used three different colors of woods to get a 3D pattern with several halve hexagons.
I used a homemade gluing jig to glue the pieces according to the chosen pattern.
Once the whole piece was assembled I put it in my homemade milling wood machine to get the required dimensions.
Sanding from grit 60 to grit 400 and three coats of mineral oil, the one used for baby butt, were the final operations.
With two components epoxy, the panel was installed.
I like the final result.
Here are some pictures


See less See more
  • Like
Reactions: 5
1 - 10 of 10 Posts
Other views


See less See more
  • Like
Reactions: 3
Very nice Great idea
Amazing work. Thanks for posting.

Excellent results. Hope he doesn't drink much.......
Using your creative juices. Really looks unique.
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.