Router Forums banner
1 - 18 of 18 Posts

·
Registered
Joined
·
8,956 Posts
Discussion Starter · #1 · (Edited)
Just finished another batch of wooden block planes.
Herb

I hate it when this site rotates my pictures I didn't even spell the title right. can't seem to edit either. Crap,crap, crap......How do I delete this post?
 

Attachments

·
Registered
Joined
·
31,264 Posts
hose are SWEET!!..

how do make/do your trademarks/signature emblem???...
 

·
Registered
Joined
·
8,956 Posts
Discussion Starter · #4 ·
I will try and post the pictures correctly.
Herb
 

Attachments

·
Registered
Joined
·
8,956 Posts
Discussion Starter · #6 ·
hose are SWEET!!..

how do make/do your trademarks/signature emblem???...
1.I cut the wafer from a thin piece with a hole saw W/O the pilot bit.

2.Mark the center on the plane, and lay it into the jig on the drill press.

3. chuck up the forstner bit the same size as the wafer and set the drill press depth to the plane and lock it in.

4. release the drill press quill, slide the shim under the plane. This will give the correct depth, clamp the plane against the fence.

5.drill the pocket for the wafer in the side of the plane.

6. glue the wafer in place.

7.Stamp the bug on the wafer.

8. finish with shellac.

Herb
 

Attachments

·
Retired Moderator
Joined
·
16,385 Posts
I fixed the title and you fixed the pictures so it's all good. Beautiful work Herb but I'm still waiting for the tutorial on the shoulder planes. Not that I want to seem pushy or anything.
 

·
Registered
Joined
·
31,264 Posts
oh so much talent....
 
  • Like
Reactions: jj777746

·
Registered
Joined
·
8,956 Posts
Discussion Starter · #11 ·
I fixed the title and you fixed the pictures so it's all good. Beautiful work Herb but I'm still waiting for the tutorial on the shoulder planes. Not that I want to seem pushy or anything.
Thanks Chuck for bailing me out on the post. I put your request on the list, I will do that when I make the next one.
HErb
 

·
Registered
Joined
·
4,625 Posts
After discussing your plane projects with a panel of experts from around the country you are officially deemed "out of control".

At our special meeting, however, it was resolved that your work is outstanding, creative, aesthetically pleasing and overall wonderful.

ABSOLUTELY AWESOME...! ! ! ! !
 

·
Registered
Joined
·
8,956 Posts
Discussion Starter · #16 ·
After discussing your plane projects with a panel of experts from around the country you are officially deemed "out of control".

At our special meeting, however, it was resolved that your work is outstanding, creative, aesthetically pleasing and overall wonderful.

ABSOLUTELY AWESOME...! ! ! ! !
You guys are too kind,when your having fun, it is hard to stop, But your right about being out of control, I'm on a roll now. Stand back there are more on the way. HAHAHAHAHAHAHAHAAHHAHAHAAHa................................................
Herb
 

·
Registered
Joined
·
8,956 Posts
Discussion Starter · #17 ·
Herb, your planes are fantastic.Do you make the blades,or buy them ready made.? I need a new block plane so I might just make one. James.
James, I bought them from Highland Hardware. I bought them out here:
https://www.highlandwoodworking.com/stanley1-58ironforpre-19889-12.aspx

But they still have some here:
https://www.highlandwoodworking.com/stanley1-38ironforpost-198860-12a.aspx

https://www.highlandwoodworking.com/stanley1-58ironforpost-19889-12a.aspx

Herb
 
1 - 18 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top