Router Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hello, I have scanned this site b-4 but never posted. I`m an old retired geezer got me hands on an old Atlas table saw Mod#3060. Has nice over-sized table with 36" rip cap. but also had a #9 wood ruff key in the shaft which I need to replace but can not get the darn thing loose. Any advice? Seem so simple, very frustrating. also may need a source for repair parts. Although everything else seems in good shape for now. Thanks
 

·
Bargains Finder
Joined
·
770 Posts
Hey Kurt, You might try to heat it up with a torch and then drive it out with a brass punch. Also you might try over at OWWM as its an older tool. I know they have at least 1 pic of a model similiar to that number you gave listed on the website there. Good luck,Tommyt
 

·
Official Greeter
Joined
·
19,833 Posts
G’day Kurt

Welcome to the router forum.

Thank you for joining us
 

·
Registered
Joined
·
10,671 Posts
Greetings Kurt and welcome to the router forum. Thank you for joining us, and remember to have fun, build well and above all be safe.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top