Router Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
22,492 Posts
Just looking at it I can see it is for a house setting, not a shop. Those filters will clog in a matter of minutes in most shops. It is no substitute for a dust collection system, even a small 2.5 inch one based on a shop vac with a dust deputy and chip capturing bucket. See pix.

I have a filter for shop air made by WEN that is built for clearing the fine sawdust that is always drifting in the shop air after working on any project. It has the same hp and filters as the far more expensive Jet, but is a LOT cheaper at $132 on Amazon https://www.amazon.com/s?k=WEN+filter&ref=nb_sb_noss It is made for this purpose and has speed control and time so you can turn it on for several hours and then leave.
 

Attachments

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top