[reible]

Is there any way I can get a picture of the back of your router table you use on the show? I have seen the front all this time and I"d like to see the back for a change. Also, I have a PC8529 I plan to use and would like to know where to get some wrenches for it. Great show, keep up the great work.

Check:
www.oak-park.com

wrenches?
www.portercable.com/index.asp?e=227&search_expr=8529&pg=0&search_posted_form=1

Hope that helps,

Ed

 

[reible]

Thanks Ed for your quick reply, but this post was intended for Bob & Rick. 1st there are no pictures of B&R's table on the Oak Park web site (back side that is). 2nd I like the looks of the wrenches B7 R use. They are straight and seem to be thicker than those from PC. Thanks again. Dave

Sorry,

Please see the small image of the back side of the table from the oak-park site (attached), a full set of plans I think are $3.95.

It has been the procedure here to have anyone answer questions if they are in the public fourm, if you want only answers from BobandRick maybe use a private message.

Ed

 

[reible]

Is there any way I can get a picture of the back of your router table you use on the show? I have seen the front all this time and I"d like to see the back for a change. Also, I have a PC8529 I plan to use and would like to know where to get some wrenches for it. Great show, keep up the great work.

Hi again,

Did you ever get your wrench question answered? Were the wrench you wanted found on the site someone suggested?

I was picturing two wrenches either taped or heat shunk together that I have seen used, ie the PC web site to find a second/third wrench.

Ed

 

[reible]

Dr. Zook, if you get the plans from Oak-Park you can see how the back of the table looks like. I built my router table from those plans and I am glad I did. Those are great plans. If you get the latest Porter-Cable router, it comes with a software with plans in it also. If you or anyone else want to see how the table looks like after being built I can take a picture of mine and post it. Later...

I have seen at least two posts here asking about what the back looks like so maybe if you took a picture and posted it......

Thanks,

Ed