Router Forums banner
1 - 1 of 1 Posts

·
Registered
Theo
Joined
·
7,195 Posts
There's a sawmill located about 150 miles from me that deals mostly with pine.
Do some checking, chances are good that you will find at least 1 sawmill closer than that. I found out years ago that there at lease 7 within 20 miles of me, and I didn't even include the guys with the small bandsaw mills.

But looking at those doors, looks like a pretty simple build, especially if they are 100 years old. If it were me I'd just do a bit of measuring, get whatever wood I wanted, along with enough for a bit of practice maybe, and make some doors.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top