Router Forums banner

1 - 9 of 9 Posts

·
Registered
Joined
·
459 Posts
Discussion Starter #1
This was a quick Xmas gift I made this week for friends. For a few hours of work the results were great!





And how it went together…















 

·
Registered
Joined
·
23,786 Posts
Nice Job NickBee

Here's little tip, replace the bearing on the bit with the

SQUARE EURO BEARING
http://woodworkersworld.net/laminate_trim_bits.shtml#sq

You can also get them from MLCS with free shipping..
http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/katana_bits4.htm
The replacement 1/2" Euro™ Square bearings are ideal for converting our Katana® edge forming bits into solid surface bits.
The non-scratch feature is great for Corian™ and other solid surface man-made materials.

The square bearing will eliminate that nasty little bearing mark on the wood that's always hard to sand out :)

the bearing will fit many router bits not just the trim bits..

====
======
 

Attachments

·
Retired Moderator
Joined
·
5,688 Posts
Hi Nick,

Beautiful work and excellent pictorial as always. Taking time to share with the rest of us is very much appreciated and I can assure you that many have benefited from your efforts.

Now that you have shown how easy this project is, I no longer have an excuse not to make one :cool::)
 

·
Registered
Joined
·
14,846 Posts
Top marks Nick for the project and top marks for the photo shoot, hopefully it will entice others to follow your lead.
 

·
Registered
Joined
·
10,715 Posts
Great looking gift Nick. As for the pics, Harry should be in shear ecstasy.
 
1 - 9 of 9 Posts
Top