Router Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I have a Bosch1617 router with a RA110o collet adapter that takes Porter Cable types of bushings.

I also have a dovetail jig that requires a 3/8 O.D. bushing.

Until this afternoon,I used a Samona bushing to do dovetails,but it broke and I am looking for a replacement.

I do not want to buy a whole kit as I already have one that I never use and I only need the 3/8 bushing.

I cannot use the Bosch bushing as it is 3/8 Inside diametre (I.D) and I need 3/8 outside diametre.

I bought the Freud bushing that is all around town (Quebec city) but it protrubes from my router base.

Any idea which brand of bushing would fit on my router (3/8 O.D.bushing)?

Many thanks from: "Stalled in the middle of my project"
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
Thanks Labric,
I will probably do that. The only problem being that I have no idea if this bushing is going to be as a Samona (i.e. ok) or as a Freud (protrubing). Will see!!
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top