Router Forums banner
1 - 4 of 11 Posts

· Registered
Joined
·
31,266 Posts
Johnson's paste wax for your tables and tools...
You can add Briwax, Black Bison, Behlen, Trewax and Mohawk to the list of acceptable waxes...
If they contain Carnauba wax they will finish harder and be longer wearing/lasting...
You can even add more Carnauba if you want...

http://www.parkbeekeeping.com/products/detail/carnauba-wax

Wax applied to a warm surface is a big plus...
Mechanical polishing over hand buffing is way better.. (elcheapo car buffer or a wool bonnet on your ROS)...
Polishing is what makes the wax work to it's fullest...
More polishing.. Better results...

above all.. make sure it DOES NOT contain silicone...

Wax clean up/removal/thinning is done w/ mineral spirits...
A pound of wax should last way more than a decade maybe even well into the second...
Put it on any tool table surface you have...
Great for plane soles too...
To melt/soften the wax put the container of wax in hot water but not submerged...

Carnauba wax, sometimes also referred to as palm wax or Brazil wax, is a kind of wax that is made from the extracts of palm leaves. These leaves are found on the plant ‘Copernicia prunifera’, a short plant that is usually found in Brazil, especially in the states of Ceara, Rio Grande do Norte and Piaui. Also known as the ‘Queen of waxes’, it is found in yellowish or brownish flakes.

Stick w/ your silicone-less furniture paste wax and avoid possible contamination of your project...
 

· Registered
Joined
·
31,266 Posts
Johnson's paste wax for your tables and tools...
You can add Briwax, Black Bison, Behlen, Trewax and Mohawk to the list of acceptable waxes...
If they contain Carnauba wax they will finish harder and be longer wearing/lasting...
You can even add more Carnauba if you want...

http://www.parkbeekeeping.com/products/detail/carnauba-wax

Wax applied to a warm surface is a big plus...
Mechanical polishing over hand buffing is way better.. (elcheapo car buffer or a wool bonnet on your ROS)...
Polishing is what makes the wax work to it's fullest...
More polishing.. Better results...

above all.. make sure it DOES NOT contain silicone...

Wax clean up/removal/thinning is done w/ mineral spirits...
A pound of wax should last way more than a decade maybe even well into the second...
Put it on any tool table surface you have...
Great for plane soles too...
To melt/soften the wax put the container of wax in hot water but not submerged...

Carnauba wax, sometimes also referred to as palm wax or Brazil wax, is a kind of wax that is made from the extracts of palm leaves. These leaves are found on the plant ‘Copernicia prunifera’, a short plant that is usually found in Brazil, especially in the states of Ceara, Rio Grande do Norte and Piaui. Also known as the ‘Queen of waxes’, it is found in yellowish or brownish flakes.

Stick w/ your silicone-less furniture paste wax and avoid possible contamination of your project...
 

· Registered
Joined
·
31,266 Posts
NickP and Stick,
Thanks so much for the information. I try to keep my table clean but that black stuff makes a big mess.
Looks like some mineral spirits and Johnsons paste wax is in order.
Thank you gentlemen, I appreciate the help.
Jim
yur welcome...
not the MS for the cleaning of the table it's for wax thinning/clean up/removal...
acetone or DNA to clean the table BEFORE the wax is applied and super buffed out super well......
buffing hardens the wax...
 

· Registered
Joined
·
31,266 Posts
What happens if it does contain the petroleum products?

Rick
or if it contains silicone...
give it to somebody you don't like...
 
1 - 4 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top