Router Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
251 Posts
Discussion Starter · #1 ·
Still busy making my first box using box joint corners. I'm replacing a crapppy, cheap wooden box that has housed a set of four Craftstman chisels, which are cradled in an insert with recesses for each chisel handle.


I want to make a replacement insert/cradle and am curious about how you guys have done this. I have some Ethafoam, which if carved out and covered with felt could make a nice insert. What I am interested in is how to carve/cut out the hemispherical recesses. They are all the same size, same as the handles, although the shaft recesses are a little different.

I've got several machines that can spin cutters and sanding discs, but not in the sort of path that these cutouts need to be.

Thanks in advance,

Rick
 

Attachments

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top