Router Forums banner

bread n wine

4251 Views 27 Replies 20 Participants Last post by  Scottart
2
ok truth is I am just posting this to bug Honest John.

One more CNC Paint project..

Dang john, covered up the numbers again.

If any of you can tell me a simple way to post an STL of this here I will post it so you can all have this file if you want it.

Thanks for all the support over the years. I have learned a ton here. and do appreciate this group.

Scott

Attachments

See less See more
  • Like
Reactions: 5
1 - 20 of 28 Posts
Another nice job you have the painting down,great job
  • Like
Reactions: 2
impressive..
  • Like
Reactions: 1
That looks real enough to dive in and start eating! Great work as usual, Scott.

David
You're just making me realize the degree of ineptness that I really belong in. I have bowed down so many times I may need a chiropractor. Like I said earlier, I can't paint a wall all one color with a roller, let alone something like this.

But, you have to get better and better and keep improving as you go along. I just stay at level "staining 101" ........ or less.

One of these days I will attempt to paint something simple. Don't know if I'll post it or not. Depends if we need a good laugh.

You know my hat is always off to you, lil buddy. Keep it up.

We, here at the forums, are somewhat responsible for your progress, as we continue to make you strive for greater heights.

Onward and Upward.

Oh -- I will be running for re-election as head of the "Scottart Fan Club". Can I count on your endorsement again?
See less See more
  • Like
Reactions: 5
Scott, Send a private message to cricket explaining STL.
  • Like
Reactions: 1
ok truth is I am just posting this to bug Honest John.

One more CNC Paint project..

Dang john, covered up the numbers again.

If any of you can tell me a simple way to post an STL of this here I will post it so you can all have this file if you want it.

Thanks for all the support over the years. I have learned a ton here. and do appreciate this group.

Scott

Very nice Scott.
Very nice how the depth increases once you've added the paint... Looks about a foot deep. Nice work, Scott.
  • Like
Reactions: 1
Super work.
Very nice painting. My wife did a similar still life with bread that looks as real. You want to reach for the butter. If the STL file is a commercial one, you may need to obtain permission to share it here. There may well be some liability for posting copyright material.
  • Like
Reactions: 1
Scott,

The carving is impressive but I guess the CNC can take most of that credit, but then your artistic side adds the color and it becomes a work of art.

Dan
  • Like
Reactions: 2
Very nice painting. My wife did a similar still life with bread that looks as real. You want to reach for the butter. If the STL file is a commercial one, you may need to obtain permission to share it here. There may well be some liability for posting copyright material.
thanks Tom.

Everything on this piece with the exceptions of parts of the grapes n leaves are of my design. the grapes and leaves come from Clip art files that come with Aspire.
You're just making me realize the degree of ineptness that I really belong in. I have bowed down so many times I may need a chiropractor. Like I said earlier, I can't paint a wall all one color with a roller, let alone something like this.

But, you have to get better and better and keep improving as you go along. I just stay at level "staining 101" ........ or less.

One of these days I will attempt to paint something simple. Don't know if I'll post it or not. Depends if we need a good laugh.

You know my hat is always off to you, lil buddy. Keep it up.

We, here at the forums, are somewhat responsible for your progress, as we continue to make you strive for greater heights.

Onward and Upward.

Oh -- I will be running for re-election as head of the "Scottart Fan Club". Can I count on your endorsement again?

well that was all good for a belly laugh. thanks John.
Scott if you can ZIP the file then It would compress the file and could be uploaded here. Sent you a PM.

Great project and of course the paint job makes it even better.
Very well done as always. The paint really pops it.
2
Here is a Zip file with Scottart's stl model

Attachments

See less See more
  • Like
Reactions: 4
Very Impressive!!
  • Like
Reactions: 1
Wow, just love it. Great Job no amazing job
  • Like
Reactions: 1
Words don't do your work justice. Keep "feeding" us!!
You're just making me realize the degree of ineptness that I really belong in. I have bowed down so many times I may need a chiropractor. Like I said earlier, I can't paint a wall all one color with a roller, let alone something like this.

But, you have to get better and better and keep improving as you go along. I just stay at level "staining 101" ........ or less.

One of these days I will attempt to paint something simple. Don't know if I'll post it or not. Depends if we need a good laugh.

You know my hat is always off to you, lil buddy. Keep it up.

We, here at the forums, are somewhat responsible for your progress, as we continue to make you strive for greater heights.

Onward and Upward.

Oh -- I will be running for re-election as head of the "Scottart Fan Club". Can I count on your endorsement again?
I will SECOND John as Head of SCOTTART fan club.
  • Like
Reactions: 1
1 - 20 of 28 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top