Router Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,535 Posts
It might be worth the extra $20 to move up to the 1300 pound version of the base. I agree with the comment on the cost of good casters--$70 or $90 for the base isn't too far above good caster pricing.

BTW--i've got an old version of that D2057 base, and one of the swivel casters delaminated. Grizzly shows them as discontinued, but they had a few left at $7.95 each. I just bought a pair yesterday. Hole spacing is 1 1/2" x 2 3/4", which is hard to find today--and the 4 different 3" casters i had in my shop would not have worked even if i drilled the plates.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top