Router Forums banner

Building a Fence for My Router Table-Split Fence? Or One Piece?

1022 Views 16 Replies 12 Participants Last post by  jw2170
For quite a while now I've just used a simple MDF fence clamped to my router table and cut out the space on the vertical piece to fit the router bit I was using. Dust collection was usually a shop vac hose duct taped to the back of the fence.
Now that I've moved into my new shop, I'd like to design and build a better router fence with improved dust collection (e.g. a 2 1/2 port on the back of the fence connected to dust collection).

Have seen videos of both split fences and solid fences being used.

What's your preference? and why?

Do you prefer a split fence that adjusts to the bit size you're using? Or (like me) do you use a solid fence, and create a zero clearance fence overlay out of 1/4 mdf to fit the bit you're using on a project, then keep or throw away the overlay when you're done?
Thanks in advance for the help guys.
  • Like
Reactions: 2
1 - 1 of 17 Posts
Welcome to the forum Gerry.
1 - 1 of 17 Posts