Router Forums banner
1 - 1 of 1 Posts

· Registered
435 Posts
Try Woodtek 819867, Router Bits, Edge Forming, Bull Nose & Half Radius, 61849 1-1/4" Diameter Bull Nose Bit - 51.99+sh. My calculator says 28 mm = 1.10 inches over size but depending on your profile you can center in a larger bit and be ok.

I have had trouble finding large bullnose 1"+ for stair treads, so if you get it and it works please let us know.

Good luck - Baker
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.