Router Forums banner
1 - 1 of 30 Posts

· Registered
103 Posts
Another consideration is the hp of your saw. A saw with a 1 1/2 or 1 3/4 will leave burn marks on wood if fed too fast with a full kerf. I like the full kerf blades too, but my saw is only 1 3/4 horses and cuts better with a thin kerf. While I haven't tried a freud blade, but I can vouch for the WoodWorker II.
Make sure blade is sharp and not full of pitch also.
1 - 1 of 30 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.