Router Forums banner

Burning while ripping on the TS

3423 Views 29 Replies 12 Participants Last post by  Cherryville Chuck
I have posted about this before and I may have found a solution. Tell me what you think (even if it's bad). LOL After posting about this last time I tuned my TS to the best of my ability. Yeah I know that may not be good enough. :surprise: The blade is square to the table, and square to the mitre slot, and the fence with the fence having a plus 5 th. on the outfeed. I am using a Freud Premier Fusion full kerf blade. After doing all of this I still got burning so I decided to you my Freud full kerf ripping blade. If I don't mess up feeding I don't get burning. I hate having to switch blades but I hate getting burning off worse.
1 - 1 of 30 Posts
I have 2 Freud Industrial blades which worked great on remodeling my kitchen. I cut a lot of maple with no problems. I have a Freud Industrial 24T rip blade and a Freud Industrial Cabinet Makers 60T blade. My Freud blades are made in Italy. I think they work great on my old Unisaw 3hp saw.
1 - 1 of 30 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.