Router Forums banner

candle holders

2088 Views 4 Replies 2 Participants Last post by  boxer
I've started making candle holders out of exotic woods. I'm not sure what to use to finish them. I use lacquer and danish oil on my boxes, but these will have to deal with a little heat. Any and all suggestions are welcome.
Kevin :confused:
1 - 5 of 5 Posts
Kevin, does your design use a metal or glass candle holder or cup?
Yes. The candle holder will have 4 holes drilled through the wood to hold glass votives.
You should be fine with the danish oil. The glass should insulate pretty well.
Thanks, Mike. I appreciate your help.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.