Router Forums banner
1 - 1 of 1 Posts

1,702 Posts
Only a guess here, I would start with the brushes, take them out then the screws on the bottom (near the chuck), then see if the blue cover will lift off.... if not take the top screws out also and see if it will lift off. The cord might be in a bushing of some sort so don't yank to hard as you don't want any broken wire to have to deal with....

Not sure of the brand on this router.... does it have a plate with amp rating and voltage infomation?

Hope someone has one of these and can help you out.

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.