Router Forums banner
1 - 3 of 3 Posts

· Registered
54 Posts
Discussion Starter · #1 ·
My first goal is to attach the 3 planks to the column a foot apart, strongly. Next the 2 wave perches, which
are heavy, must be fastened to the column. The last perch will span to to the column in the corner where
it will join with an 8’ plank which goes way to the left, over the door. The real challenge is getting the
planks and perches securely fastened to the column. The 4X4 column has wire over it, which is fastened
with a 3/4” X 3-1/2” wood strip.
I’m doing it in 3 phases, all illustrated. Phase 1 is mounting the 3 planks, phase 2 will be the
2 waves, and phase 3 will be the wide plank.
This is my first project post.


· Super Moderator
6,975 Posts
@dale will be waiting to see the finished product.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.