Router Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
120 Posts
I was watching a '98 episode of This Old House today and Tom Silver was routing flutes and had made a jig to keep them equi spaced.
He had fitted a plywood base to the router and had accurately drilled holes for dowel pins at the spacing required.
2 holes for each spacing.
He had a short length of timber to use as a fence which had 2 holes to match the holes in the base.
Once the position of the first flute had been set he routed it then moved the fence to the next pair of holes and so on until the column was finished.
He needed 6 flutes so router 3 with the fence on one side of the column and the other 3 with the fence on the other side.
With stops clamped to the column as end stops he routed perfect flutes on each column.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top