Router Forums banner

Cherry NE

1221 Views 1 Reply 2 Participants Last post by  challagan
Well here is a cherry NE I did today. It was green and I turned it to finish. The walls are slightly larger than 1/8" thick. I then microwaved it thru several defrost cycles to finish drying it. After that I put it back on the lathe to finish sanding it. It has one coat of Antique Danish Oil on it. It is 8 1/4" X 7 1/2" X 2 1/2" tall.



See less See more
1 - 2 of 2 Posts
Nice one Bernie! I know turning one of those can beat the heck out of you! Very nice natural edge!

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.