Router Forums banner
1 - 10 of 10 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I made this simple circle cutting jig with some scrap plywood. I needed an 8 inch wood circle for a lamp base. This jig was really easy to make and use. I got a perfect circle for my project.
 

·
Official Greeter
Ross
Joined
·
10,073 Posts
Welcome to the forum.
 

·
Premium Member
Retired since June 2000
Joined
·
15,059 Posts
Welcome to the forum and SNAP!
 

Attachments

  • Like
Reactions: MYB506

·
Premium Member
Retired since June 2000
Joined
·
15,059 Posts
Late forum member and good friend Bob Jurgens,( Bobj3) came up with a better version, instead of fitting the router to the jig, a template guide was fitted to the router and the hole in the jig was the same diameter, otherwise they were the same. It was just a case of sitting the router on the jig. Bob was very clever and would think outside of the box. His premature death was a big loss for the forum and is sadly missed.
 
1 - 10 of 10 Posts
Top