Router Forums banner
1 - 1 of 37 Posts

· Read Only
1 Posts
Clock carcass complete. Now my favorite part! Finishing! (actually I hate finishing. Normally just spray on lacquer or poly and call it good)

On this piece I will apply 2 to 3 coats of tung oil, let dry and then finish with spray poly. The lumber just came out too pretty not to do a decent finish on it.

I ended up hating the feet I made so I am going without. I'll add some rubber button feet to protect the surface on whatever the clock sits on. I need to attach the metal clock face with 4 screws and finally add the back but all easy stuff.

So thanks all for joining me on my little project. Hope it was a fun follow.

View attachment 400059
View attachment 400060
View attachment 400061
Absolutely beautiful work! I hope the person that receives this clock realizes what a piece of craftsmanship it is. This is the type of work that is passed down through generations of families.
1 - 1 of 37 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.