Router Forums banner
1 - 11 of 11 Posts

·
Super Moderator
John
Joined
·
6,973 Posts
I think woodcrafts still sells them
Have you ever used this system
This is a set I have
Need to zoom in to see the pattern on front and sides
 
  • Like
Reactions: TenGees

·
Registered
Mike
Joined
·
3,959 Posts
I bought a kit at a hock shop just to get the bit with the thought of designing and cutting some templates on the CNC. I never found the time to do it yet.

The 2 critical things to remember when designing templates to use with that bit are the minimum and maximum width that the bit is made to cut as related to the bottom and top of the cone of the bit.
 

·
Registered
Mike
Joined
·
3,959 Posts
It will be Wednesday before I can go to the shop and check to see if I got a set of instructions with the set. I'll let you know if I do have them. It's is on a list of things I need to do!
 

·
Registered
Mike
Joined
·
3,959 Posts
Here are the instructions that came with the set I purchased.

Font Newspaper Parallel Screenshot Paper


Here are some Youtube links to check out also:

 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top