Router Forums banner
1 - 1 of 1 Posts

· Registered
17,596 Posts
Don’t know if this helps. You don’t have to purchase the steppers . They have them prebuilt for Nema34 and 23

Plug and Play NEMA 34 CNC Control System - CRP800-00E-8 | Avid CNC | CNC Router Parts

I just want a new one not Chinese, simple xyz

when my cutters jam is spikes the box then thepowerblows and the box is useless

I have a quality one box now that works perfect

but I have the spindle seperatly operated so the box is seperat from spindle

so im half way there

I baught a inverter getting that wired by electrician this week

I have 2 cnc the other one I would like to try a new control box does any body know of anybody that has turnkey boxes for xyz control box

will do sindle seperatly
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.