Router Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
377 Posts
A control box needs to be designed to match the steppers/servos that are used on your machine. If you have a little 1610 CNC or a large 4’x8’ machine with 1.5kw servos, they will require different control / drive systems, so the more info you can provide, the better of recommendations can be made.

If this is a newly purchased machine, I would recommend contacting the seller to provide you with setup and operating instructions.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top