Router Forums banner
1 - 1 of 1 Posts

·
Registered
Mike
Joined
·
3,960 Posts
Robert a single pass cut of 1.5" will probably take 6kw minimum to get feed rates you would be looking for and the 9kw would be better so you have the extra power available. You would also be looking for large long compression bits to minimize any damage to the surface veneers.

Personally if I were looking for a large industrial CNC machine for a business I would be looking at US based companies that have good support and quick reliable repair services. I would also consider it a plus if they are close to your location because some companies will add airline and hotel charges to the repair bill.

If you buy overseas you may be the only support and repair service that you can get. Make sure they have a readable manual and that any tech support they do supply is provided in a language you understand and talk.

And that's my 2 cents.
 
  • Like
Reactions: RainMan 2.0
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top