Router Forums banner

CNC Router 48"x75" w/ 4th Axis

1177 Views 1 Reply 1 Participant Last post by  carobinsonjr
$8,000!! Bottom dollar. Moving so it has to go, or I disassemble and put in storage.

Sibe Automation 4 Axis CNC Router- not a kit or built from kit

Table is 48"x75" with 48"x 60" usable work area. Z axis is 17"+!

Spindle is a 4hp, 13.3 amp, 220v, 300 Hz, 21,000 RPM 3 phase spindle. Nema 23, 1288oz, 1.8 degree Automation Direct Stepper Motors. Computer w/ Mach 3 Software installed, monitor, and $1,200 Rotary Phase Converter included in price.

Cut wood, plastic, metal. This is a beast.

Excellent condition, just no room.

Similar, but smaller, table on Ebay sells for $23,000.

Located in York, South Carolina just 20 minutes southwest of Charlotte, NC.

PM if interested, but time is of the essence.


See less See more
1 - 2 of 2 Posts
Make Offer!

:crying:House is under contract, CNC must go. Make offer. All reasonable offers considered, but needs to go soon! My loss is your gain!
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.