Router Forums banner

CNC Routerparts Standard 48x96inch

1017 Views 2 Replies 2 Participants Last post by  nlancaster
5
Selling a CNCRouterParts Standard 4ft x 8ft CNC Router
Built on a welded steel table system with 8020 aluminum.
Steel rail with regular bearing blocks.

Very accurate and powerful router with a 3HP 24,000RPM Spindle.
Upto 1/2 inch tooling.
I have run everything from 1/2millimeter to 2inch planning bits without issues.
Comes ready to run with computer running MACH3.

$9000 Cash, or best offer
You will have to arrange pickup/delievery, weight is about 700pounds machine is aproximatly 9ftx6ft in size.

Email me to arrange a viewing if you would like to check it out. Available most evenings and weekends.

Attachments

See less See more
1 - 3 of 3 Posts
Where is it? You don't list a location.

Thanks
Arg, thought it was in there.

Machine is in Tigard Oregon, Just outside of Portland Oregon. ZIP 97223
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top