Router Forums banner

Craftsman 315.175040 Aluminum Base Removal HELP!

749 Views 7 Replies 6 Participants Last post by  TenGees
[quote removed by moderator]
I haven't figured it out yet. Trying to remove the motor from the base of my Craftsman 315.175040 router.
Thanks in advance

1 - 8 of 8 Posts
Welcome to the forum @stevecpayne
Welcome to the forum @stevecpayne
Also trying to figure this out, bought this router model at a garage sale, but the depth guide appears to be 180deg off.
Welcome to the forum @Fleetybob
G'day @Fleetybob , welcome to the forum.
Welcome to the forum, I'm sorry you're not having much luck here with your issues. Have you checked YouTube yet ?
Camera accessory Camera lens Cameras & optics Lens Camera
See less See more
I have no experience with this router. Have you tried removing the red depth adjustment ring (2 screws)? To me it looks like that could be involved. Just don't ask me how to get it back together if you do remove it. ;-)
  • Like
Reactions: 1
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.