Router Forums banner
1 - 1 of 1 Posts

·
Registered
Theo
Joined
·
7,196 Posts
Just joined. Need some help with repair/restoration. Pulled the armature to get to the business end of the threads. Missing a lock nut but found a suitable jam nut. The threads for the lock nut are messed up. Will use a die and clean up. Don't know the proper size. It is obviously larger than the collet threads. Any help?
Not quite sure what you're saying.
First you say the lock nut is missing.
Then say you found a suitable jam nut.
Then say the threads for the lock nut are messed up; but you just said the lock nut is missing.

Either that or take it to your local hardware and try nuts until you find one that fits.

So, what is it that is missing, and what is it that is messed up?

If you have something that threads on, and something else that is messed up, I would just try dies on whatever will thread on, find one that fits, then use the die on the messed up thingy.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top