Router Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
98 Posts
Jason
There are a few different ways that I have tried to this. They all worked pretty well.
The 1/4 dadoe worked well I think the glue makes up for the strength you may loose although I don't think this would be a good choice for you if you plan on using the cubbies anything heavy.
You could use pocket screws and glue on the underside if the shelves if they are hidden from view. These work well (over the last few years I've become a big fan of pocket screws.)
You could use biscuts and glue. This works well and the joinery is hidden.
You could use shelf pins.
You could use cleats attached with bolts. Not too pretty, but effective.
Just a few suggestions I'm sure you will get more.
Good luck
Wayne
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top