Router Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
443 Posts
Discussion Starter · #1 ·
going to trace and digitize the diagram and create a cnc toolpath
to cut the mirror from acrylic

design a mirror from a feather profile



Just a quick note, I use utube as a platform to store and reference my videos I do not receive any money from utube and they should really
not be advertising on my videos (people have asked)
 

Attachments

·
Registered
Joined
·
1,813 Posts
No idea what you are talking about but you make the process seem easy. I bet there is a high learning curve. Really nice work.
 

·
Registered
Joined
·
443 Posts
Discussion Starter · #3 ·
No idea what you are talking about but you make the process seem easy. I bet there is a high learning curve. Really nice work.
I would not say there is a steep learning curve, maybe a little bit of practice
If you can trace , you can create a *.dxf file then make a tool path and cut it out
 

·
Registered
Joined
·
443 Posts
Discussion Starter · #5 ·
Thanks, looks like you have a lot of experience.
I have been using these drawing boards since 2008 but its just a lot of usage to get real good at it and quick
I was never a cad person and i do such a variety I was unable to make dxf files it was a difficult learning curve, this tracing method is easy
and a lot of times no editing is required
 
1 - 5 of 5 Posts
Top