Router Forums banner
1 - 1 of 18 Posts

· Retired Moderator
16,386 Posts
On anything with a threaded adjustment the amonut of travel with one full turn of the adjustment knob is equal to the pitch of the thread on the rod. If it's a metric thread of 1mm pitch then 1 turn equal one mm of travel. If it is Imperial and say 3/8 by 16 thread pitch then 1 turn equal 1/16th inch of travel.
1 - 1 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.