@Tom Lindsay
have you checked the brushes are placed correctly? #4 in #6
![White Organism Font Line Auto part]()
this should have been the last step shaft install. they are easy to break.
![Circuit component Auto part Font Jewellery Metal]()
there should be tension on the wire in the brush. push against the motor shaft (Armature)
![Font Fashion accessory Rectangle Auto part Paint brush]()
copper end lower right
have you checked the brushes are placed correctly? #4 in #6
this should have been the last step shaft install. they are easy to break.
there should be tension on the wire in the brush. push against the motor shaft (Armature)
copper end lower right
