Router Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,998 Posts
All adjustments are made with the locking lever OFF, Every time.
Once you are ready to pass wood through the machine, put the locking lever ON. This will stop the plane head from tilting and producing poor start and stop cuts on the wood. This is known as "snipe".
The sole purpose of the locking lever is to prevent snipe.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top