Router Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
428 Posts
Discussion Starter · #1 · (Edited)
Hey,been awhile
Thought some might be interested in this.I took my router table off the right wing of my cabinet saw,and moved it to the out feed side of my saw.i have a aftermarket sliding table attachment,and now I can use it with the router table as well as the saw. This mod also greatly reduces the total width of the unit,and provides out feed support for the saw. Table is 1" thick phenolic,with incra master lift,and general dust enclosure.have a incra ls 17 wonder fence and veritas fence that fits the tee tracks
 

Attachments

1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top