[woodman12]

I took these full sized plans and digitized them on the Logic Trace Digitizing System
to produce a toolpath and then cut it
on a cnc machine




https://youtube/36lOiQGALyc bird wall art video

 

[4DThinker]

Nicely done, @woodman12 !

Stretch the drawing taller and you've got a nice panel to make a folding screen out of.

4D

 

[Tagwatts]

Nice work. Questions, how long did it take to convert a project like this? What were your final dimensions? Thanks

 

[Bushwhacker]

I took these full sized plans and digitized them on the Logic Trace Digitizing System
to produce a toolpath and then cut it
on a cnc machine




https://youtube/36lOiQGALyc bird wall art video

Hers another one that I have no idea what you just said.

David

 

[woodman12]

the final panel was about 42 x78in , came out of a 4x8x1/2 birch sheet
limited to my cnc table which is 49x98 in

 

[woodman12]

not sure here what the question is ""Hers another one that I have no idea what you just said.
I took a large diagram and digitized it to produce a *.dxf file format full size and the create
a toolpath and then cut it

 

[thomas1389]

not sure here what the question is ""Hers another one that I have no idea what you just said.
I took a large diagram and digitized it to produce a *.dxf file format full size and the create
a toolpath and then cut it

Oh, now I understand. clear as mud. I guess I'm a little behind. I just found sliced bread.

 

[woodman12]

the conversion can take about 1 hour to maybe 1.5 hrs, its a lot of tracing and saving each part