Router Forums banner

DIY sub-base for Leigh FMT?

3984 Views 25 Replies 7 Participants Last post by  Ace Slapahoe
Hey everyone,

I picked up used Leigh FMT mortise and tenon jig recently. Unfortunately, it is missing the sub-base to mount the router on. I called Leigh and the sub-base is available for about $300CAD. Before I take the plunge on a new one I thought I might try making one to at least get started playing around with this thing. So I was wondering if anyone here has one and would be willing to take some measurements for me so I could figure out the rough size and placement of the pins and the router?

Thanks very much.
1 - 1 of 26 Posts
the FMT and the FMT Pro are different animals...
also, is it sub base for the router or for the jig???...
which is it???...
1 - 1 of 26 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top