Router Forums banner
1 - 1 of 11 Posts

· Registered User
2,392 Posts
don caron said:
i had a similar problem with the Sears. My answer was to cut a bit off the end of the guide, so it would allow the bit to sit at the correct depth. I got good results. I think that as long as the guide can make contact with the fingers, you're going to be able to use it to make your dovetails.
Don Caron

W e l c o m e . . A b o a r d !!​
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.